Make Sure Your Storage is Up and Initialized. Server is Powered Up and Connected as Per Diagram. Step 1: Add Server into Storage by Direct Connect or SAN Switch [Note: if SAN Switch is Used Make Proper SAN Switch Zone Configuration]. Step 2: Create Volume for Servers SAN Boot Like 100GB or 500GB whatever You Need. Step3: Assign the SAN Boot Disk as Per the Server’s. Step3: Configure Server HBA Card and Select the HBA Path for SAN Boot. [Note: Per HBA Port You Can Assign Multiple Storage Port if SAN Switch is Used] Step4: Save Server BIOS Settings and Reboot. Step5: Install Operating System.