Display: I'm using with the Raspberry Pi 3 with Debian but it should work with others In the terminal, type in "sudo apt-get install xinput-calibrator" then "sudo nano /boot/ " Add the following in the file: hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 dtparam=spi=on dtparam=i2c_arm=on dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900 dtoverlay=w1-gpio-pullup,gpiopin=4,extpullup=1